Magnetic Chuck 1 pcs
Grinding Wheel 1 pcs
Wheel dresser with diamond 1 pcs
Wheel flange 1 pcs
Tool box 1 pcs
leveling screw and plates 1 pcs
flange extractor 1 pcs
Tool box with adjusting tool 1 pcs
wheel balancing arbor 1 pcs
coolant system 1 pcs
wheel balancing base 1 pcs
Linear scale (1 um 2 axis cross/vertical)
Structure: main casting are made of super wear resitant cast iron and are quenched to eliminate the inner stress, so as to ensure high precision,high. rigidity and to increase of service life.
Slide rail: double V slide rail on all sides are stick to TURCITE-B which is an Italian great wear-resistant rail belt and are scraped precisely to make it smooth sliding and wear-resistant.It is most suitable for forming grinding.
Spindle: The direct type spindle is designed by cartridge-type integration, and are made of super-precise cylindrical bearing of German P4 degree. The spindle is less noise, low vibration and high torque and is suitable for heave cutting and all kinds of grinding.
Auto lubrication system: It is a loop type Auto lubrication system. Lubricant can automatically loop and provide forced lubrication for all screws and slide rail. The auto lubrication system could greatly reduce wear level of slide rail. There is a oil mirror above the column to check the situation of lubrication.
Worktable drive system: It use clad steel wire synchronous belt drive to reduce replacement of steel wire. The synchronous belt is connected with worktable with a flexible connection to ensure smooth drive.
Free flow design: It could supply oil for slide rail on constant pressure. Therefore, The design could eliminate the error of accuracy of working slide rail caused by oil supply of electromagnetic.
|Main specification||Work table size||150x450mm||150×380mm|
|Max.Length of grinding||475mm||375mm|
|Max.width of grinding||160mm||160mm|
|Distance from spindle centre to work table||350~400mm||350~300mm|
|Standard sizeof magnetic disk||150x400mm||150x400mm|
|Gross feed||Manual stroke||480mm||380mm|
|Longitudinal feed||Manual stroke||180mm||180mm|
|Handwheel per revolution||5mm||5mm|
|Handwheel per gradu tai on||0.02mm||0.02mm|
|Vertical feed||Handwheel per revolution||1mm||1mm|
|Handwheel per gradu tai on||0.005mm||0.005mm|
|Machine weight||Gross weight||750kg||690kg|